Home >> Chemicals Listing >> hot product list by S  

Silane, trichlorooctyl- (5283-66-9)

Identification
Name:Silane, trichlorooctyl-
Synonyms:LS 2190;Octyltrichlorosilane; P 09830; Trichlorooctylsilane; n-Octyltrichlorosilane
CAS:5283-66-9
EINECS: 226-112-1
Molecular Formula: C8H17 Cl3 Si
Molecular Weight: 247.6642
InChI: InChI=1S/C8H17Cl3Si/c1-2-3-4-5-6-7-8-12(9,10)11/h2-8H2,1H3
Molecular Structure: (C8H17Cl3Si) LS 2190;Octyltrichlorosilane; P 09830; Trichlorooctylsilane; n-Octyltrichlorosilane
Properties
Transport:UN 1801 8/PG 2
Flash Point: 206 °F
Boiling Point: 233 °C731 mm Hg(lit.)
Density:1.07 g/mL at 25 °C(lit.)
Refractive index:n20/D 1.447(lit.)
Solubility:Soluble in carbon tetrachloride
Specification:

Octyltrichlorosilane (CAS NO.5283-66-9) is a colorless liquid with a pungent odor.It is decomposed by water to hydrochloric acid with evolution of heat. It is corrosive to metals and tissue.Chlorosilanes, such as Octyltrichlorosilane , are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.It is toxic, inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Contact with molten substance may cause severe burns to skin and eyes. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.Combustible material: it may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.

Report:

Reported in EPA TSCA Inventory.

Packinggroup: II
Flash Point: 206 °F
Sensitive: Moisture Sensitive
Color: Fuming liquid
Water-white liquid
Safety Data
Hazard Symbols