Home >> msds >> 1-(Dimethylamino)tetradecane

1-(Dimethylamino)tetradecane

Print        Favorite
[Fire Fighting]

Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources.
[Ingestion]

Do not induce emesis - dilution: following ingestion and/or prior to gastric evacuation, immediately dilute with 4 to 8 ounces (120 to 240 ml) of milk or water (not to exceed 15 ml/kg in a child). The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation.
[Inhalation]

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
[Skin]

Remove contaminated clothing, wash exposed area with copious amounts of water. A physician should examine the area if irritation or pain persists.
[Eyes]

Eye exposure results in mild discomfort (0.1 Percent solution) to very serious corneal damage (1 to 10 percent solution) depending on the concentration. Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
[Storage]

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
[Handling]

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
[Inhalation]

Respiratory muscle paralysis, pulmonary edema, occupational asthma, and hypoxemia have been reported.
[Skin]

Dermal necrosis has resulted from exposure to cetrimonium bromide in concentrations ranging from 2 to 17.5 Percent. A number of these agents have caused irritant or allergic contact dermatitis.
[Ingestion]

Vomiting, diarrhea and abdominal pain may occur. Ingestion of concentrated solutions may produce burns of the mouth, pharynx, and esophagus. Hemorrhagic gi tract necrosis and peritonitis have been reported.
[Personal Protection]

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
[Respirators]

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
[Exposure Effects]

CNS depression progressing to coma, seizures, shock, and respiratory muscle paralysis has been reported.
[Poison Class]

3
[Appearance]

A light yellow liquid with a fishlike odor.
[Boiling Point]

105 - 110 (0.1 torr)
[Usage]

Cationic detergent, corrosion inhibitor.
[Product Name]

1-(Dimethylamino)tetradecane
[Synonyms]

Armeen dm 14d
Dimethylmyristamine
Dimethylmyristylamine
Dimethyltetradecylamine
N,N-Dimethylmyristylamine
N,N-Dimethyltetradecylamine
[CAS]

"CASEN_112-75-4.htm">112-75-4
[Formula]

C16H35N
[Molecular Weight]

241.46
[EINECS]

204-002-4
[Beilstein/Gmelin]

1748246
[Beilstein Reference]

3-04-00-00419
[Small spills/leaks]

Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Apply water spray or mist to knock down vapors. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Remove trapped material with suction hoses.
[Stability]

Acid-stable.
[Incompatibilities]

Incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides.