Home >> msds >> Linalyl acetate

Linalyl acetate

Print        Favorite
[Flash Point]

90
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. This material is lighter than water and insoluble in water. The fire could easily be spread by the use of water in an area where the water cannot be contained. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Fire Potential]

Combustible.
[Ingestion]

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
[Skin]

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
[Storage]

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use with adequate ventilation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Do not breathe vapors.
[Inhalation]

Causes respiratory tract irritation. Aspiration may lead to pulmonary edema. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
[Skin]

Causes severe skin irritation. Contact with skin may cause discoloration and eczema. Nervous and digestive symptoms develop from repeated skin exposure. P ersons sensitive to this oil may develop photodermatitis.
[Eyes]

Causes eye irritation. May cause chemical conjunctivitis.
[Ingestion]

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Exposure Effects]

Effects may be delayed. Repeated skin exposure may cause nervous and digestive symptoms.
[Appearance]

Clear, colorless, oily liquid. Bergamot odor.
[Solubility in water]

Insoluble
[Boiling Point]

220
[Vapor Pressure]

.1
[Density]

0.913 g/cm3 (15 C)
[Usage]

In perfumery.
[Vapor Density]

6.77
[Refractive Index]

1.447 (20 C)
[Product Name]

3,7-Dimethyl-1,6-octadien-3-yl acetate
[Synonyms]

3,7-Dimethyl-1,6-octadien-3-ol acetate
3,7-Dimethyl-1,6-octadien-3-yl acetate
3,7-Dimethylocta-1,6-dien-3-yl acetate
Bergamiol
Linalol acetate
Lincareol acetate
[CAS]

"CASEN_115-95-7.htm">115-95-7
[Formula]

C12H20O2
[Molecular Weight]

196.29
[EINECS]

204-116-4
[RTECS]

RG5910000
[RTECS Class]

Primary Irritant
[Merck]

12,5521
[Beilstein/Gmelin]

1724497
[Beilstein Reference]

3-02-00-00300
[Small spills/leaks]

Wash area with soap and water. Clean up spills immediately, using the appropriate protective equipment. Cover with sand, dry lime or soda ash and place in a closed container for disposal. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
[Stability]

Stable under normal temperatures and pressures.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Carbon monoxide, carbon dioxide.