Home >> msds >> o-Anisoyl chloride

o-Anisoyl chloride

Print        Favorite
[Flash Point]

84
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. Extinguishing media: Do NOT get water inside containers. For large fires, use water spray, fog or alcohol-resistant foam. Do NOT use straight streams of water. For small fires, use carbon dioxide, dry chemical, dry sand, or alcohol-resistant foam. Cool containers with flooding quantities of water until well after fire is out.
[Fire Potential]

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.
[Ingestion]

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
[Inhalation]

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
[Skin]

Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
[Eyes]

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
[Storage]

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Refrigerator (approx 4 C). Do not store in metal containers. Store protected from moisture.
[Handling]

Wash thoroughly after handling. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
[Ingestion]

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
[Inhalation]

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract.
[Skin]

Causes skin burns.
[Eyes]

Contact with eyes may cause severe irritation, and possible eye burns.
[Hazards]

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
[EC Risk Phrase]

R 34
[EC Safety Phrase]

S 26 36/37/39 45
[UN (DOT)]

2392
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Appearance]

Clear, colorless liquid.
[Solubility in water]

Insoluble
[Boiling Point]

137
[Density]

1.57 g/cm3
[Vapor Density]

5.9
[Refractive Index]

1.57 (20 C)
[Product Name]

2-Methoxybenzoyl chloride
[Synonyms]

2-Anisoyl chloride
2-Methoxybenzoic acid chloride
2-Methoxybenzoyl chloride
o-Methoxybenzoyl chloride
[CAS]

"CASEN_21615-34-9.htm">21615-34-9
[Formula]

C8H7ClO2
[Molecular Weight]

170.6
[EINECS]

244-477-5
[Beilstein/Gmelin]

607605
[Beilstein Reference]

4-10-00-00168
[EC Class]

corrosive
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Do not get water inside containers.
[Stability]

Stable at room temperature in closed containers under normal storage and handling conditions.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, chloride fumes.
[Combustion Products]

Fire may produce irritating, corrosive and/or toxic gases.
[UN Number]

2392
[Hazard Class]

3
[Packing Group]

III
[HS Code]

2918 90 90