Home >> msds >> EDTA ferric sodium salt

EDTA ferric sodium salt

Print        Favorite
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Ingestion]

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
[Inhalation]

The toxicological properties of this substance have not been fully investigated. Inhalation of dust may cause respiratory tract irritation.
[Skin]

May cause skin irritation.
[Eyes]

May cause eye irritation.
[Ingestion]

Ingestion of large amounts may cause gastrointestinal irritation. May cause kidney damage.
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Exposure Effects]

Chronic exposure may cause kidney damage.
[Appearance]

White to off-white solid.
[Usage]

Iron fortifying agent.
[Product Name]

EDTA ferric sodium salt
[Synonyms]

Ferrate(1-), [[N,N'-1,2-ethanediylbis[N-[(carboxy-kO)methyl]glycinato-kN,kO]](4-)]-, sodium, (OC-6-21)-
Ferric sodium edetate
Iron monosodium EDTA
Sequestrene NaFe
Sodium iron(III) ethylenediaminetetraacetate
Sytron
[CAS]

"CASEN_15708-41-5.htm">15708-41-5
[Formula]

C10H12FeN2NaO8.3H2O
[Molecular Weight]

421.09
[EINECS]

239-802-2
[RTECS]

AH4900000
[RTECS Class]

Other
[Merck]

12,4076
[Beilstein/Gmelin]

NA
[Small spills/leaks]

Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.
[Stability]

Stable at room temperature in closed containers under normal storage and handling conditions.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, sodium oxide.