Home >> msds >> 4-Hydroxyphenylacetamide

4-Hydroxyphenylacetamide

Print        Favorite
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Ingestion]

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation.
[Inhalation]

May cause respiratory tract irritation.
[Skin]

May cause skin irritation.
[Eyes]

May cause eye irritation.
[Ingestion]

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
[EC Risk Phrase]

R 36/37/38
[EC Safety Phrase]

S 26 36
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Exposure Effects]

Effects may be delayed.
[Appearance]

Beige powder.
[Melting Point]

175
[Boiling Point]

344
[Partition Coefficient]

.5
[Vapor Density]

5.21
[Product Name]

2-(4-Hydroxyphenyl)acetamide
[Synonyms]

(p-Hydroxyphenyl)acetamide
2-(4-Hydroxyphenyl)acetamide
2-(p-Hydroxyphenyl)acetamide
4-Hydroxybenzeneacetamide
Benzeneacetamide, 4-hydroxy-
p-(Carbamoylmethyl)phenol
[CAS]

"CASEN_17194-82-0.htm">17194-82-0
[Formula]

C8H9NO2
[Molecular Weight]

151.16
[EINECS]

241-235-0
[RTECS]

AC3851500
[RTECS Class]

Mutagen
[Beilstein/Gmelin]

2085984
[Beilstein Reference]

3-10-00-00434
[Small spills/leaks]

Clean up spills immediately, using the appropriate protective equipment. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.
[Stability]

Stable at room temperature in closed containers under normal storage and handling conditions.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.