| [Flash Point] 101 | |
| [Fire Fighting] Fire Extinguishing Agents Not to Be Used: Water may be ineffective.Fire Extinguishing Agents: Foam, dry chemical, carbon dioxide | |
| [Ingestion] Force milk or water at once; get medical attention. | |
| [Inhalation] Remove victim to fresh air; if required, start artificial respiration and call a doctor. | |
| [Skin] Flush with water; get medical attention for burns. | |
| [Eyes] Flush with water for at least 15 min.; get medical attention if irritation persists. | |
| [Storage] Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | |
| [Handling] All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. | |
| [Ingestion] Nausea and vomiting have been reported following dermal exposure in one worker. | |
| [Inhalation] Inhalation causes coughing and irritation of nose and throat; lung injury may occur. Ingestion causes irritation and burning of mouth and stomach. Contact of vapor with eyes causes irritation. Liquid may cause severe eye burns and irritation of skin. | |
| [Skin] Skin irritation, necrosis, and allergic contact dermatitis have been reported in workers. | |
| [Eyes] See inhalation | |
| [Hazards] Compound may polymerize when hot and burst container. | |
| [EC Risk Phrase] R 36 43 | |
| [EC Safety Phrase] S 24/25 26 37/39 | |
| [Personal Protection] Suitable protective clothing & self-contained resp protective apparatus should be available for use of those who may have to rescue of persons overcome by fumes. Acrylic acid & derivatives. | |
| [Respirators] Use NIOSH/MSHA approved respirator appropriate for exposure of concern. | |
| [Appearance] White liquid with a light unpleasant odor. | |
| [Solubility in water] 107 g/L (25 C) | |
| [Melting Point] -17 | |
| [Boiling Point] 219 | |
| [Vapor Pressure] 10 (66 C) | |
| [Density] 1.03 g/cm3 | |
| [Partition Coefficient] .58 | |
| [Usage] Comonomer in cross-linked-thermoset-acrylic coating resins, for elastomers, for laminating resins, monomer for nonwoven fabric binder. | |
| [Product Name] 2-Hydroxypropyl methacrylate | |
| [Synonyms] 1,2-Propanediol, monomethacrylate 2-Propenoic acid, 2-methyl, monoester-with-1,2-propanediol Methacrylic acid, ester with 1,2-propanediol Methacrylic acid, monoester with 1,2-propanediol Propylene glycol monomethacrylate Rocryl-410 | |
| [CAS] "CASEN_27813-02-1.htm">27813-02-1 | |
| [Formula] C7H12O3 | |
| [Molecular Weight] 144.16999999999999 | |
| [EINECS] 248-666-3 | |
| [RTECS] UD3442500 | |
| [RTECS Class] Other | |
| [Beilstein/Gmelin] NA | |
| [EC Index Number] 607-125-00-5 | |
| [EC Class] irritant, sensitizing | |
| [Small spills/leaks] Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces. | |
| [Disposal Code] 1 | |
| [Stability] No data. | |
| [HS Code] 2916 14 90 |
Print