Home >> msds >> Methyl trifluoroacetate

Methyl trifluoroacetate

Print        Favorite
[Flash Point]

-7
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Extremely flammable liquid. Containers may explode in the heat of a fire. Will be easily ignited by heat, sparks or flame. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam. Do NOT use straight streams of water.
[Fire Potential]

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.
[Ingestion]

Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth respiration if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
[Skin]

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
[Eyes]

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed.
[Storage]

Keep away from heat, sparks, and flame. Store in a tightly closed container. Poison room locked/refrigerator. Refrigerator/flammables. Store in a cool, dry area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
[Inhalation]

The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
[Skin]

Causes skin irritation. May cause dermatitis. May cause cyanosis of the extremities.
[Eyes]

Produces irritation, characterized by a burning sensation, redness, tearing, inflammation, and possible corneal injury. Lachrymator. May cause chemical conjunctivitis and corneal damage.
[Ingestion]

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Ingestion of large amounts may cause CNS depression.
[Hazards]

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers.
[EC Risk Phrase]

R 11 34
[EC Safety Phrase]

S 16 26 36/37/39 45
[UN (DOT)]

1992
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Exposure Effects]

Effects may be delayed.
[Appearance]

Colorless liquid. Ester-like odor.
[Solubility in water]

Soluble
[Melting Point]

-78
[Boiling Point]

43
[Vapor Pressure]

430 (25 C)
[Density]

1.2639 g/cm3
[Partition Coefficient]

.5
[Heat Of Vaporization]

28.5 kJ/mol
[Vapor Density]

4.41
[Refractive Index]

1.2925 (20 C)
[Product Name]

Methyl trifluoroacetate
[Synonyms]

Acetic acid, trifluoro-, methyl ester
Methyl 2,2,2-trifluoroacetate
Methyl perfluoroacetate
[CAS]

"CASEN_431-47-0.htm">431-47-0
[Formula]

C3H3F3O2
[Molecular Weight]

128.05000000000001
[EINECS]

207-074-5
[Beilstein/Gmelin]

1756070
[Beilstein Reference]

4-02-00-00463
[EC Class]

highly flammable, irritant
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.
[Disposal Code]

2
[Stability]

Stable under normal temperatures and pressures.
[Incompatibilities]

Strong oxidizing agents, strong bases.
[Decomposition]

Carbon monoxide, carbon dioxide, hydrogen fluoride.
[Combustion Products]

Fire will produce irritating, corrosive and/or toxic gases.
[UN Number]

1992
[Hazard Class]

3
[Packing Group]

I; II; III
[HS Code]

2915 90 80