| [Flash Point] 84 | |
| [Fire Fighting] Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | |
| [Ingestion] If swallowed, wash out mouth with water provided person is conscious. Call a physician. | |
| [Inhalation] If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | |
| [Skin] In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | |
| [Eyes] In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. | |
| [Ingestion] May be harmful if swallowed. | |
| [Inhalation] May be harmful if inhaled. Material is irritating to mucous membranes and upper respiratory tract. | |
| [Skin] Causes skin irritation. May be harmful if absorbed through the skin. | |
| [Eyes] Causes irritation. | |
| [Hazards] Emits toxic fumes under fire conditions. | |
| [EC Risk Phrase] 36/37/38 | |
| [EC Safety Phrase] 26 36 | |
| [Personal Protection] Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | |
| [Respirators] Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. | |
| [Appearance] Colorless liquid. | |
| [Solubility in water] 0.47 g/L (25 C) | |
| [Melting Point] 118 - 120 | |
| [Boiling Point] 215 | |
| [Vapor Pressure] 0.22 (25 C) | |
| [Density] 1.928 g/cm3 (25 C) | |
| [pKa/pKb] 12.16 (pKb) | |
| [Partition Coefficient] 1.83 | |
| [Heat Of Vaporization] 43.33 kJ/mol | |
| [Refractive Index] 1.6363 (20<sup>o</sup>C) | |
| [Product Name] 2-Iodopyridine | |
| [Synonyms] 2-Pyridyl iodide | |
| [CAS] "CASEN_5029-67-4.htm">5029-67-4 | |
| [Formula] C5H4IN | |
| [Molecular Weight] 205 | |
| [Beilstein Reference] 5-20-05-00438 | |
| [Small spills/leaks] Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete. | |
| [Stability] Stable at normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Carbon monoxide, Carbon dioxide, Nitrogen oxides, Hydrogen iodide. |
Print