| [Flash Point] 109 | |
| [Fire Fighting] Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | |
| [Ingestion] If swallowed, wash out mouth with water provided person is conscious. Call a physician. | |
| [Inhalation] If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | |
| [Skin] In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | |
| [Eyes] In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. | |
| [Ingestion] May be harmful if swallowed. | |
| [Inhalation] May be harmful if inhaled. Material may be irritating to mucous membranes and upper respiratory tract. | |
| [Skin] May cause skin irritation. May be harmful if absorbed through the skin. May cause allergic skin reaction. | |
| [Eyes] Causes eye irritation. | |
| [Hazards] Emits toxic fumes under fire conditions. | |
| [EC Risk Phrase] 36 | |
| [EC Safety Phrase] 26 | |
| [UN (DOT)] 3334 | |
| [Personal Protection] Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | |
| [Respirators] Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. | |
| [Solubility in water] 2.4 g/L | |
| [Melting Point] 16.5 | |
| [Boiling Point] 242 - 243 | |
| [Vapor Pressure] 0.01 (25 C) | |
| [Density] 1.237 g/cm3 (25 C) | |
| [pKa/pKb] 6.50 (pKa) | |
| [Partition Coefficient] 1.81 | |
| [Heat Of Vaporization] 51.37 kJ/mol | |
| [Refractive Index] >1.629 (20 C) | |
| [Product Name] 3-Hydroxythiophenol | |
| [Synonyms] 3-Hydroxybenzenethiol 3-Hydroxyphenylmercaptan 3-Hydroxythiophenol m-Hydroxybenzenethiol m-Mercaptophenol Monothioresorcinol | |
| [CAS] "CASEN_40248-84-8.htm">40248-84-8 | |
| [Formula] C6H6OS | |
| [Molecular Weight] 126.18 | |
| [Beilstein Reference] 2-06-00-00827 | |
| [Small spills/leaks] Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete. | |
| [Stability] Stable at normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Carbon monoxide, Carbon dioxide, Sulfur oxides. | |
| [UN Number] 3334 | |
| [Hazard Class] 9 | |
| [Packing Group] III |
Print