| [Flash Point] 44 | |
| [Fire Fighting] Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | |
| [Fire Potential] Combustible liquid. | |
| [Ingestion] If swallowed, wash out mouth with water provided person is conscious. Call a physician. | |
| [Inhalation] If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | |
| [Skin] In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | |
| [Eyes] In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. | |
| [Storage] Keep tightly closed. Keep away from heat and open flame. Store in a cool dry place. | |
| [Inhalation] Material may be irritating to mucous membranes and upper respiratory tract. | |
| [Skin] May cause irritation. | |
| [Eyes] May cause irritation. | |
| [Hazards] Emits toxic fumes under fire conditions. | |
| [EC Risk Phrase] 10 | |
| [EC Safety Phrase] 16 36 | |
| [UN (DOT)] 1993 | |
| [Personal Protection] Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | |
| [Respirators] Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the so means of protection, use a full-face supplied air respirator. | |
| [Exposure Effects] May be harmful by inhalation, ingestion, or skin absorption. | |
| [Solubility in water] 0.10 g/L (25 C) | |
| [Melting Point] -71 | |
| [Boiling Point] 146 | |
| [Vapor Pressure] 5.6 (25 C) | |
| [Density] 1.134 g/cm3 (25 C) | |
| [Partition Coefficient] 3.62 | |
| [Heat Of Vaporization] 36.86 kJ/mol | |
| [Refractive Index] 1.4494 (25 C) | |
| [Product Name] 1-Bromo-4-methylpentane | |
| [Synonyms] 4-Methylpentyl bromide Isohexyl bromide Isopentylmethyl bromide NSC 159166 | |
| [CAS] "CASEN_626-88-0.htm">626-88-0 | |
| [Formula] C6H13Br | |
| [Molecular Weight] 165.07 | |
| [EINECS] 210-968-8 | |
| [Small spills/leaks] Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Oxides of carbon, hydrogen bromide gas. | |
| [UN Number] 1993 | |
| [Hazard Class] 3 | |
| [Packing Group] III |
Print