Home >> msds >> 2-Formyl-3,4-dihydro-2H-pyran

2-Formyl-3,4-dihydro-2H-pyran

Print        Favorite
[Flash Point]

48 (open cup)
[Fire Fighting]

Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use alcohol foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources.
[Fire Potential]

HIGHLY FLAMMABLE.
[Ingestion]

Seek medical assistance.
[Inhalation]

Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
[Skin]

Remove and isolate contaminated clothing and shoes. Wash skin with soap and water. Flush with running water for at least 20 minutes
[Eyes]

Flush with running water for at least 20 minutes.
[Storage]

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
[Handling]

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
[Inhalation]

Vapors may cause dizziness or suffocation. May cause irritation or burns.
[Skin]

May cause irritation or burns.
[Eyes]

See Skin.
[Hazards]

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
[UN (DOT)]

2607
[Personal Protection]

Wear appropriate protective gloves, clothing and goggles.
[Respirators]

Wear positive pressure self-contained breathing apparatus (SCBA).
[Exposure Effects]

The toxological properties of this substance have not been fully investigated.
[Poison Class]

4
[Appearance]

A colorless or yellow liquid with a pungent disagreeable odor.
[Solubility in water]

Soluble
[Boiling Point]

146
[Density]

0.94 g/cm3 (12 C)
[Usage]

Used to make other chemicals, plastics.
[Refractive Index]

1.463 (20 C)
[Product Name]

2-Formyl-3,4-dihydro-2H-pyran
[Synonyms]

2-Formyl-3,4-dihydro-2H-pyran
2H-Pyran-2-carboxaldehyde, 3,4-dihydro-
3,4-Dihydro-2H-pyran-2-aldehyde
3,4-Dihydro-2H-pyran-2-carboxaldehyde
[CAS]

"CASEN_100-73-2.htm">100-73-2
[Formula]

C6H8O2
[Molecular Weight]

112.14
[EINECS]

202-884-5
[RTECS]

UP6825000
[RTECS Class]

Primary Irritant
[Beilstein/Gmelin]

107244
[Beilstein Reference]

5-17-09-00131
[Small spills/leaks]

Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Use water spray to knock-down vapors. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Remove trapped material with suction hoses.
[Incompatibilities]

Flammable and/or toxic gases are generated by the combination with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents Can react with air to give first peroxo acids, and ultimately carboxylic acids.
[Stability]

Polymerizes easily.
[Combustion Products]

Fire may produce irritating, corrosive and/or toxic gases.
[UN Number]

2607
[Hazard Class]

3
[Packing Group]

III