| [Flash Point] 154 | |
| [Fire Fighting] Extinguish fire using carbon dioxide, dry chemical powder, or water spray. Use a NIOSH/MSHA approved SCBA and ful protective equipment. | |
| [Ingestion] Seek medical assistance immediately. | |
| [Inhalation] Move victim to fresh air. Administer oxygen if having problem breathing. | |
| [Skin] Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. | |
| [Eyes] Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. | |
| [Storage] Keep in a tightly closed container in a cool, dry location. Store only with compatible chemicals. | |
| [Handling] All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. | |
| [Inhalation] Cough and nasal irritation have been seen in humans exposed to 1200 ppm for about 1.5 Minutes. | |
| [Skin] Skin contact represents a moderate degree of hazard, which decreases as the concentration decreases to 25% or less in water. | |
| [Ingestion] Irritation of the gastrointestinal tract is likely after exposure to morpholine. The amount of irritation is dependent upon the concentration. | |
| [Personal Protection] Use chemical protective gloves and safety goggles. | |
| [Respirators] Use a NIOSH/MSHA approved SCBA. | |
| [Exposure Effects] May cause cancer. | |
| [Appearance] Yellow crystalline solid. | |
| [Solubility in water] Soluble | |
| [Melting Point] 126 - 128 | |
| [pKa/pKb] 3.58 (pKa) | |
| [Usage] Staining protector in rubber, in vulcanization of rubber, fungicide. | |
| [Vapor Density] 1.3 | |
| [Product Name] 4,4'-Dithiodimorpholine | |
| [Synonyms] 4Mmorpholin-4-yldisulfanylmorpholine Bismorpholine disulfide Di(4-morpholinyl) disulfide N,N'-Dithiodimorpholine Rhenocure M/G Sulfasan | |
| [CAS] "CASEN_103-34-4.htm">103-34-4 | |
| [Formula] C8H16N2O2S2 | |
| [Molecular Weight] 236.36 | |
| [EINECS] 203-103-0 | |
| [RTECS] QE3325000 | |
| [RTECS Class] Mutagen | |
| [Merck] 12,3437 | |
| [Beilstein/Gmelin] 126214 | |
| [Beilstein Reference] 4-27-00-00613 | |
| [Small spills/leaks] Evacuate area. Use recommending protective equipment. Sweep up and place in an appropriate container. Hold for disposal. Wash contaminated surfaces to remove any residue. | |
| [Incompatibilities] Acid halides and acid anhydrides. | |
| [Stability] Stable at normal temperatures and pressures. |
Print