Home >> msds >> Ketanserin

Ketanserin

Print        Favorite
[Fire Fighting]

Extinguish with carbon dioxide, dry chemical powder, polymer foam, water spray. Use self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
[Ingestion]

Remove dentures and clear mouth. If person is conscious, rinse mouth with water. Call physician or poison control immediately.
[Inhalation]

Remove from exposure. If breathing is difficult, administer oxygen. If breathing stops, administer artificial respiration. Seek medical attention immediately.
[Skin]

Wash with soap and water for 15 minutes. Remove contaminated clothing and shoes. Seek medical attention immediately.
[Eyes]

Check for and remove contact lenses. Flush eyes with running water for at least 15 minutes separating eyelids. Seek medical attention immediately
[Storage]

This product should be stored at room temperature. It should be kept in a tightly closed container.
[Personal Protection]

For spill clean up, wear suitable protective clothing, chemical resistant rubber gloves, rubber boots, and chemical safety goggles. Self contained breathing apparatus or NIOSH/MSHA approved respirator is required.
[Exposure Effects]

May be harmful if ingested, inhaled, or absorbed through the skin. Symptoms of overexposure can include: low blood pressure, light-headedness, sedation, tremor, convulsions or vomiting.
[Appearance]

White to off-white solid.
[Solubility in water]

Insoluble
[Melting Point]

231
[Density]

1.28 g/cm3 (20 C)
[pKa/pKb]

6.26 (pKb)
[Partition Coefficient]

3.21
[Usage]

Classified as an antihypertensive, serotonin antagonist.
[Product Name]

Ketanserin
[Synonyms]

2,4(1H,3H)-Quinazolinedione, 3-[2-[4-(4-fluorobenzoyl)-1-piperidinyl]ethyl]-
3-[2-[4-(4-Fluorobenzoyl)piperidin-1-yl]ethyl]-1H-quinazoline-2,4-dione
[CAS]

"CASEN_74050-98-9.htm">74050-98-9
[Formula]

C22H22FN3O3
[Molecular Weight]

395.43
[EINECS]

277-680-2
[Merck]

12,5307
[Small spills/leaks]

Wipe up spill and place in sealed container and hold for disposal. Avoid raising dust. Ventilate the area and wash spill site after material has been removed.
[Incompatibilities]

Oxidizing agents.
[Stability]

Stable if stored as directed.
[Combustion Products]

Carbon monoxide, Carbon dioxide, Nitrogen oxides, Fluorine, Hydrogen fluoride.