| [Flash Point] 30 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: Use carbon dioxide or dry chemical. Use alcohol foam. | |
| [Ingestion] Get medical aid. Wash mouth out with water. | |
| [Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
| [Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | |
| [Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
| [Storage] Store in a cool, dry place. Store in a tightly closed container. | |
| [Handling] Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. | |
| [Ingestion] May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. | |
| [Inhalation] May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. | |
| [Skin] May cause skin irritation. | |
| [Eyes] May cause eye irritation. | |
| [Personal Protection] Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
| [Appearance] Liquid. Penetrating odor. | |
| [Boiling Point] 160-180 | |
| [Density] 1.04 g/cm3 | |
| [Product Name] 2-Methyltetrahydrofuran-3-thiol | |
| [Synonyms] 2-Methyloxolane-3-thiol 3-Furanthiol, tetrahydro-2-methyl- | |
| [CAS] "CASEN_57124-87-5.htm">57124-87-5 | |
| [Formula] C5H10OS | |
| [Molecular Weight] 118.19 | |
| [EINECS] 260-572-4 | |
| [Beilstein/Gmelin] NA | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. | |
| [Stability] No data. | |
| [Incompatibilities] Strong oxidizing agents. |
Print